Cisco Catalyst 2960 Series, Configuration Manual

Page: 1240 / 2288

DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. enable
Example:
Device> enable
Step 1
• Enter your password if prompted.
Displays information about your device certificate, the
certification authority (CA) certificate, and any
registration authority (RA) certificates. show crypto pki certificates
Example:
Device# show crypto pki certificates
Step 2
Enters global configuration mode.
configure terminal
Example:
Device# configure terminal
Step 3
Enters certificate chain configuration mode. crypto pki certificate chain name
Example:
Device(config)# crypto pki certificate chain
myca
Step 4
Deletes the certificate. no certificate certificate-serial-number
Example:
Device(config-cert-chain)# no certificate
0123456789ABCDEF0123456789ABCDEF
Step 5
Exits certificate chain configuration mode and returns
to global configuration mode. exit
Example:
Device(config-cert-chain)# exit
Step 6
Deletes a certificate manually. no crypto pki import name certificate
Example:
Device(config)# no crypto pki import MS
certificate
Step 7
Exits global configuration mode and returns to privileged
EXEC mode.
exit
Example:
Device(config)# exit
Step 8
Viewing Keys and Certificates
Perform the following task toview keys and certificates:
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1158
Monitoring and Maintaining Certification Authority