Cisco Catalyst 2960 Series, Configuration Manual

Page: 507 / 2288

Purpose Command or Action
Returns to privileged EXEC mode. end
Example:
Switch(config)#
end
Step 9
Make sure that you have reestablished the connection
between the switch and the event connection by
examining the output from
show cns event connections .
Step 10
Verifies your entries.
show running-config
Example:
Switch# show running-config
Step 11
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 12
Related Topics
Hostname and DeviceID, on page 411
Enabling a Partial Configuration for Cisco IOS CNS Agent
Follow these steps to enable the Cisco IOS CNS agent and to initiate a partial configuration on the switch.
SUMMARY STEPS
1.
enable
2. configure terminal
3. cns config partial { ip-address | hostname } [ port-number ] [ source ip-address ]
4.
end
5. show running-config
6. copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password if prompted. enable Step 1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
425
How to Configure the Configuration Engine