Cisco Catalyst 2960 Series, Configuration Manual

Page: 1129 / 2288

Purpose Command or Action
Exits interface configuration mode and returns to
privileged EXEC mode. end
Example:
Device(config-if)# end
Step 10
Specifying the Security Violation Mode
When there is a security violation on a port, the port can be shut down or traffic can be restricted. By default,
the port is shut down. You can configure the period of time for which the port is shut down.
SUMMARY STEPS
1. enable
2. configure terminal
3.
interface type slot / port
4. switchport
5.
switchport mode access
6. authentication port-control auto
7. mab [ eap ]
8.
authentication violation
{
restrict
|
shutdown
}
9. authentication timer restart seconds
10. end
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. enable Step 1
Example:
Device> enable
• Enter your password if prompted.
Enters global configuration mode. configure terminal
Example:
Device# configure terminal
Step 2
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1047
How to Configure MAC Authentication Bypass