Cisco Catalyst 2960 Series, Configuration Manual

Page: 2138 / 2288

• The remote username associated with the current TTY (terminal) process. For example, if the user is
connected to the router through Telnet and was authenticated through the
username command, the
switch software sends the Telnet username as the remote username.
• The switch hostname.
For a successful RCP copy request, you must define an account on the network server for the remote username.
If the server has a directory structure, the configuration file is written to or copied from the directory associated
with the remote username on the server. For example, if the configuration file is in the home directory of a
user on the server, specify that user's name as the remote username.
Preparing to Download or Upload a Configuration File By Using RCP
Before you begin downloading or uploading a configuration file by using RCP, do these tasks:
• Ensure that the workstation acting as the RCP server supports the remote shell (rsh).
• Ensure that the switch has a route to the RCP server. The switch and the server must be in the same
subnetwork if you do not have a router to route traffic between subnets. Check connectivity to the RCP
server by using the
ping
command.
• If you are accessing the switch through the console or a Telnet session and you do not have a valid
username, make sure that the current RCP username is the one that you want to use for the RCP download.
You can enter the show users privileged EXEC command to view the valid username. If you do not
want to use this username, create a new RCP username by using the ip rcmd remote-username username
global configuration command to be used during all copy operations. The new username is stored in
NVRAM. If you are accessing the switch through a Telnet session and you have a valid username, this
username is used, and you do not need to set the RCP username. Include the username in the copy
command if you want to specify a username for only that copy operation.
• When you upload a file to the RCP server, it must be properly configured to accept the RCP write request
from the user on the switch. For UNIX systems, you must add an entry to the .rhosts file for the remote
user on the RCP server. For example, suppose that the switch contains these configuration lines:
hostname Switch1
ip rcmd remote-username User0
If the switch IP address translates to Switch1.company.com, the .rhosts file for User0 on the RCPserver should
contain this line:
Switch1.company.com Switch1
For more information, see the documentation for your RCP server.
Downloading a Configuration File By Using RCP
Beginning in privileged EXEC mode, follow these steps to download a configuration file by using RCP:
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2056
Working with Configuration Files