Cisco Catalyst 2960 Series, Configuration Manual

Page: 1517 / 2288

Purpose Command or Action
Creates an authorization method list for web-based
authorization. aaa authorization auth-proxy default group { |
radius }
Example:
Switch(config)#
aaa authorization auth-proxy default
Step 5
group
Specifies an AAA server.
tacacs-server host
{ hostname | ip_address }
Example:
Switch(config)# tacacs-server host 10.1.1.1
Step 6
Configures the authorization and encryption key
used between the switch and the TACACS server. tacacs-server key { key-data }
Example:
Switch(config)# tacacs-server key
Step 7
Returns to privileged EXEC mode.
end
Example:
Switch(config)# end
Step 8
Verifies your entries. show running-config
Example:
Switch# show running-config
Step 9
(Optional) Saves your entries in the configuration
file.
copy running-config startup-config
Example:
Switch#
copy running-config startup-config
Step 10
Configuring Switch-to-RADIUS-Server Communication
Follow these steps to configure the RADIUS server parameters:
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1435
How to Configure Web-Based Authentication