Cisco Catalyst 2960 Series, Configuration Manual

Page: 501 / 2288

SUMMARY STEPS
1.
enable
2. configure terminal
3.
cns template connect name
4.
cli config-text
5. Repeat Steps 3 to 4 to configure another CNS connect template.
6.
exit
7. cns connect name [ retries number ] [ retry-interval seconds ] [ sleep seconds ] [ timeout seconds ]
8.
discover { controller controller-type | dlci [ subinterface subinterface-number ] | interface [ interface-type ]
| line line-type }
9.
template name
[ ... name ]
10. Repeat Steps 8 to 9 to specify more interface parameters and CNS connect templates in the CNS connect
profile.
11.
exit
12. hostname name
13. ip route network-number
14.
cns id interface num
{
dns-reverse
|
ipaddress
|
mac-address
} [
event
] [
image
]
15. cns id { hardware-serial | hostname | string string | udi } [ event ] [ image ]
16. cns config initial { hostname | ip-address } [ port-number ] [ event ] [ no-persist ] [ page page ] [ source
ip-address ] [ syntax-check ]
17.
end
18. show running-config
19. copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password if prompted. enable Step 1
Example:
Switch> enable
Enters the global configuration mode.
configure terminal
Example:
Switch# configure terminal
Step 2
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
419
How to Configure the Configuration Engine