Cisco Catalyst 2960 Series, Configuration Manual

Page: 1986 / 2288

event_register_mat
Registers for a MAT event. Use this Tcl command extension to generate an event when a mac-address is
learned in the mac-address-table.
Syntax
event_register_identity [tag ?] interface ?
[mac-address ?]
[type {add | delete}]
[hold-down ?]
[maxrun ?]
Arguments
(Optional) String identifying a tag that can be used
with the trigger Tcl command extension to support
multiple event statements within a Tcl script. tag
A regular expression pattern to match against interface
names. interface
Mandatory if the interface parameter is not specified.
A regular expression pattern that can be used to filter
events by mac addresses of the remote device. mac-address
(Optional) Filter based on a mac-address-table event
type of add or delete. If not specified, the event type
is not used in determining whether the event should
be triggered. type
(Optional) When a mac-address-table event comes
in, the hold-down timer can be set to make the event
to wait between 1 and 4294967295 seconds before
processing the policy. If not set then the policy is not
delayed in being processed. hold-down
(Optional) Maximum run time of the script (specified
in SSSSSSSSSS[.MMM] format, where SSSSSSSSSS
must be an integer representing seconds between 0
and 31536000, inclusive, and where MMM must be
an integer representing milliseconds between 0 and
999). If this argument is not specified, the default
20-second run-time limit is used. maxrun
Result String
None
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1904
event_register_mat