Cisco Catalyst 2960 Series, Configuration Manual

Page: 1457 / 2288

Purpose Command or Action
Example:
Switch(config)# authentication mac-move
In Session Aware Networking mode, the default CLI is
access-session mac-move deny . To enable Mac Move in
Session Aware Networking, use the no access-session
mac-move global configuration command.
permit
Returns to privileged EXEC mode. end
Example:
Switch(config)# end
Step 3
Verifies your entries. show running-config
Example:
Switch#
show running-config
Step 4
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 5
Enabling MAC Replace
MAC replace allows a host to replace an authenticated host on a port.
Beginning in privileged EXEC mode, follow these steps to enable MAC replace on an interface. This procedure
is optional.
SUMMARY STEPS
1. configure terminal
2.
interface interface-id
3. authentication violation { protect | replace | restrict | shutdown }
4. end
5.
show running-config
6. copy running-config startup-config
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1375
How to Configure 802.1x Port-Based Authentication