Cisco Catalyst 2960 Series, Configuration Manual

Page: 1018 / 2288

SUMMARY STEPS
1.
enable
2. configure terminal
3.
radius-server vsa send [ accounting | authentication ]
4. end
5. show running-config
6.
copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password if prompted. enable
Step 1
Example:
Switch>
enable
Enters the global configuration mode. configure terminal
Example:
Switch# configure terminal
Step 2
Enables the switch to recognize and use VSAs as defined by
RADIUS IETF attribute 26. radius-server vsa send [ accounting |
authentication ]
Step 3
Example:
Switch(config)# radius-server vsa send
• (Optional) Use the accounting keyword to limit the set of
recognized vendor-specific attributes to only accounting
attributes.
• (Optional) Use the authentication keyword to limit the set
of recognized vendor-specific attributes to only authentication
attributes.
If you enter this command without keywords, both accounting and
authentication vendor-specific attributes are used.
Returns to privileged EXEC mode. end
Example:
Switch(config)# end
Step 4
Verifies your entries. show running-config
Example:
Switch# show running-config
Step 5
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
936
How to Configure RADIUS