DETAILED STEPS
Purpose
Command or Action
Enables privileged EXEC mode. Enter your password if prompted.
enable
Step 1
Example:
Switch>
enable
Enters the global configuration mode.
configure terminal
Example:
Switch#
configure terminal
Step 2
Removes any existing SPAN configuration for the session.
no monitor session
{
session_number
|
all
|
local
|
remote
}
Step 3
•
For
session_number
, the range is 1 to 66.
Example:
Switch(config)#
no monitor session 1
•
all
—
Removes all SPAN sessions.
•
local
—
Removes all local sessions.
•
remote
—
Removes all remote SPAN sessions.
Specifies the RSPAN session and the source port (monitored port).
monitor session session_number source
{
interface interface-id
|
vlan vlan-id
} [
,
|
-
]
[
both
|
rx
|
tx
]
Step 4
•
For
session_number
, the range is 1 to 66.
Example:
Switch(config)#
monitor session 1
•
Enter a source port or source VLAN for the RSPAN session:
◦
For
interface-id
, specifies the source port to monitor. Valid
interfaces include physical interfaces and port-channel logical
source interface gigabitethernet1/0/1
tx
interfaces (
port-channel port-channel-number
). Valid
port-channel numbers are 1 to 48.
◦
For
vlan-id
, specifies the source VLAN to monitor. The range
is 1 to 4094 (excluding the RSPAN VLAN).
A single session can include multiple sources (ports or VLANs),
defined in a series of commands, but you cannot combine
source ports and source VLANs in one session.
•
(Optional) [
,
|
-
]
—
Specifies a series or range of interfaces. Enter a
space before and after the comma; enter a space before and after the
hyphen.
•
(Optional)
both
|
rx
|
tx
—
Specifies the direction of traffic to monitor.
If you do not specify a traffic direction, the source interface sends
both sent and received traffic.
◦
both
—
Monitors both received and sent traffic.
◦
rx
—
Monitors received traffic.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
493
How to Configure SPAN and RSPAN
Summary of Contents for Catalyst 2960 Series
