Cisco Catalyst 2960 Series, Configuration Manual

Page: 853 / 2288

SUMMARY STEPS
1.
enable level
2. disable level
DETAILED STEPS
Purpose Command or Action
Logs in to a specified privilege level. enable level Step 1
Example:
Switch> enable 15
Following the example, Level 15 is privileged EXEC mode.
For level , the range is 0 to 15.
Exits to a specified privilege level. disable level
Step 2
Example:
Switch#
disable 1
Following the example, Level 1 is user EXEC mode.
For level , the range is 0 to 15.
Related Topics
Privilege Levels, on page 757
Monitoring Switch Access
Table 85: Commands for Displaying DHCP Information
Displays the privilege level configuration. show privilege
Configuration Examples for Setting Passwords and Privilege Levels
Example: Setting or Changing a Static Enable Password
This example shows how to change the enable password to l1u2c3k4y5 . The password is not encrypted and
provides access to level 15 (traditional privileged EXEC mode access):
Switch(config)# enable password l1u2c3k4y5
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
771
Monitoring Switch Access