Cisco Catalyst 2960 Series, Configuration Manual

Page: 1539 / 2288

How to Configure Auto Identity
Configuring Auto Identity Globally
SUMMARY STEPS
1. enable
2.
configure terminal
3.
sourcetemplate
{
AI_GLOBAL_CONFIG_TEMPLATE
| template-name }
4. aaa new-model
5.
radius server name
6. address ipv4 { hostname | ipv4-address }
7. key ipv4 { 0 string | 7 string } string
8.
end
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. enable
Example:
Switch> enable
Step 1
• Enter your password if prompted.
Enters global configuration mode. configure terminal
Example:
Switch# configure terminal
Step 2
Configures an auto identity template. sourcetemplate
{ AI_GLOBAL_CONFIG_TEMPLATE |
template-name }
Step 3
• AI_GLOBAL_CONFIG_TEMPLATE is a built-in
template.
Example:
Switch(config)# source template
AI_GLOBAL_CONFIG_TEMPLATE
• template-name is a user-defined template.
Enables the authentication, authorization, and accounting (AAA)
access control mode. aaa new-model
Example:
Switch(config)# aaa new-model
Step 4
Specifies the name for the RADIUS server configuration for
Protected Access Credential (PAC) provisioning and enters
RADIUS server configuration mode. radius server name
Example:
Switch(config)# radius server ISE
Step 5
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1457
Auto Identity