Cisco Catalyst 2960 Series, Configuration Manual

Page: 997 / 2288

Description Attribute Sub-Type Number Vendor-Specific
Company Code Number
PPP name authentication.
To apply for PAP, do not
configure the
ppp pap
sent-name password
command on the interface.
For PAP,
“
preauth:send-name
”
and
“ preauth:send-secret ” will
be used as the PAP
username and PAP
password for outbound
authentication. For CHAP,
“
preauth:send-name
”
will
be used not only for
outbound authentication,
but also for inbound
authentication. For a
CHAP inbound case, the
NAS will use the name
defined in
“ preauth:send-name ” in the
challenge packet to the
caller box.
The send-name
attribute has
changed over
time: Initially, it
performed the
functions now
provided by both
the send-name and
remote-name
attributes. Because
the remote-name
attribute has been
added, the
send-name
attribute is
restricted to its
current behavior. Note
send-name 1 9 26
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
915
Information about RADIUS