Cisco Catalyst 2960 Series, Configuration Manual

Page: 2022 / 2288

(Optional) Priority level at which the script will be
queued:
• queue_priority low--Specifies that the script is
to be queued at the lowest of the three priority
levels.
• queue_priority normal--Specifies that the script
is to be queued at a priority level greater than
low priority but less than high priority.
• queue_priority high--Specifies that the script is
to be queued at the highest of the three priority
levels.
• queue_priority last--Specifies that the script is
to be queued at the lowest priority level.
If more than one script is registered with the
queue_priority_last argument set, these scripts will
execute in the order in which the events are published.
The queue_priority argument specifies the
queuing priority, but not the execution
priority, of the script being registered.
Note
If this argument is not specified, the default queuing
priority is normal.
queue_priority
(Optional) Specifies the time period in seconds during
which the snmp notification event detector waits for
the policy to exit. The time period is specified in
ssssssssss[.mmm] format, where ssssssssss must be
an integer representing seconds between 0 and
4294967295 and mmm must be an integer
representing milliseconds between 0 and 999. default
(Optional) Policy run-time priority setting. When the
nice argument is set to 1, the policy is run at a
run-time priority that is less than the default priority.
The default value is 0. nice
(Optional) The direction of the incoming or outgoing
SNMP trap or inform PDU to filter. The default value
is incoming. direction
(Optional) The action to be taken on the SNMP PDU
(drop it or send it) once the event is triggered. The
default value is send. msg_op
Result String
None
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1940
event_register_snmp_notification