Purpose
Command or Action
(Optional) Saves your entries in the configuration file.
copy running-config startup-config
Example:
Switch#
copy running-config startup-config
Step 5
Related Topics
Default IGMP Snooping Configuration, on page 122
Enabling or Disabling IGMP Snooping on a VLAN Interface
Follow these steps to enable IGMP snooping on a VLAN interface:
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip igmp snooping vlan vlan-id
4.
end
5.
copy running-config startup-config
DETAILED STEPS
Purpose
Command or Action
Enables privileged EXEC mode. Enter your password if prompted.
enable
Step 1
Example:
Switch>
enable
Enters the global configuration mode.
configure terminal
Example:
Switch#
configure terminal
Step 2
Enables IGMP snooping on the VLAN interface. The VLAN ID
range is 1 to 1001 and 1006 to 4094.
ip igmp snooping vlan vlan-id
Example:
Switch(config)#
ip igmp snooping vlan 7
Step 3
IGMP snooping must be globally enabled before you can enable
VLAN snooping.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
129
How to Configure IGMP Snooping and MVR
Summary of Contents for Catalyst 2960 Series
