Cisco Catalyst 2960 Series, Configuration Manual

Page: 1954 / 2288

(Optional) Policy run-time priority setting. When the
nice argument is set to 1, the policy is run at a
run-time priority that is less than the default priority.
The default value is 0. nice
If multiple conditions exist, the application event will be raised when all the conditions are satisfied.
Result String
None
Set _cerrno
No
Event_reqinfo
Event_reqinfo
"event_id %u event_type %u event_type_string {%s} event_pub_sec %u event_pub_msec %u"
"sub_system 0x%x type %u data1 {%s} data2 {%s} data3 {%s} data4 {%s}"
Description Event Type
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id. event_id
Type of event.
event_type
An ASCII string that represents the name of the event
for this event type. event_type_string
The time, in seconds and milliseconds, when the event
was published to the Embedded Event Manager
(EEM).
event_pub_sec event_pub_msec
Number assigned to the EEM policy that published
the application event. Number is set to 798 because
all other numbers are reserved for Cisco use. sub_system
Event subtype within the specified component. type
Argument data that is passed to the
application-specific event when the event is published.
The data is character text, an environment variable,
or a combination of the two. data1 data2 data3 data4
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1872
event_register_appl