Cisco Catalyst 2960 Series, Configuration Manual

Page: 1887 / 2288

Example Description Environment Variable
.*UPDOWN.*FastEthernet0/0.* A regular expression pattern match
string that is used to compare
syslog messages to determine when
the policy runs. _syslog_pattern
The table below describes the EEM environment variables that must be set before the tm_cli_cmd.tcl sample
policy is run.
Table 177: Environment Variables Used in the tm_cli_cmd.tcl Policy
Example Description Environment Variable
0-59/1 0-23/1 * * 0-7 A CRON specification that
determines when the policy will
run. _cron_entry
show version The CLI command to be executed
when the policy is run. _show_cmd
The table below describes the EEM environment variables that must be set before the tm_crash_reporter.tcl
sample policy is run.
Table 178: Environment Variables Used in the tm_crash_reporter.tcl Policy
Example Description Environment Variable
1 A value that identifies whether
debug information for
tm_crash_reporter.tcl will be
enabled. This variable is optional
and need not be specified. _crash_reporter_debug
http://www.example.com/fm/interface_tm.cgi The URL location to which the
crash report is sent. _crash_reporter_url
The table below describes the EEM environment variables that must be set before the tm_fsys_usage.tcl
sample policy is run.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1805
Configuration Examples for Writing Embedded Event Manager Policies Using Tcl