Cisco Catalyst 2960 Series, Configuration Manual

Page: 1030 / 2288

Use the test aaa group command to check load-balancing transactions. Note
How to Configure RADIUS Server Load Balancing
Enabling Load Balancing for a Named RADIUS Server Group
SUMMARY STEPS
1.
enable
2. configure terminal
3.
radius-server host { hostname | ip-address } [ test username name ] [ auth-port number ]
[ ignore-auth-port ] [ acct-port number ] [ ignore-acct-port ] [ idle-time seconds ]
4.
aaa group server radius group-name
5. load-balance method least-outstanding [ batch-size number ] [ ignore-preferred-server ]
6.
end
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. enable
Step 1
Example:
Device> enable
• Enter your password if prompted.
Enters global configuration mode. configure terminal
Example:
Device# configure terminal
Step 2
Enables RADIUS automated testing. radius-server host { hostname | ip-address } [ test username
name ] [ auth-port number ] [ ignore-auth-port ] [ acct-port number ]
[ ignore-acct-port ] [ idle-time seconds ]
Step 3
Example:
Device(config)# radius-server host 192.0.2.1 test
username test1 idle-time 1
Enters server group configuration mode. aaa group server radius group-name
Example:
Device(config)# aaa group server radius rad-sg
Step 4
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
948
How to Configure RADIUS Server Load Balancing