Cisco Catalyst 2960 Series, Configuration Manual

Page: 687 / 2288

SUMMARY STEPS
1.
configure terminal
2. mls qos map cos-dscp dscp1...dscp8
3.
end
4.
show mls qos maps cos-dscp
5. copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enters the global configuration mode. configure terminal
Example:
Switch# configure terminal
Step 1
Modifies the CoS-to-DSCP map.
mls qos map cos-dscp dscp1...dscp8
Step 2
Example:
Switch(config)#
mls qos map
For dscp1...dscp8 , enter eight DSCP values that correspond
to CoS values 0 to 7. Separate each DSCP value with a space.
The DSCP range is 0 to 63.
cos-dscp 10 15 20 25 30 35 40 45
To return to the default map, use the no mls qos
cos-dscp global configuration command.
Note
Returns to privileged EXEC mode.
end
Example:
Switch(config)# end
Step 3
Verifies your entries. show mls qos maps cos-dscp
Example:
Switch# show mls qos maps cos-dscp
Step 4
(Optional) Saves your entries in the configuration file.
copy running-config startup-config
Example:
Switch# copy-running-config
Step 5
startup-config
Related Topics
Default CoS-to-DSCP Map, on page 568
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
605
How to Configure QoS