Cisco Catalyst 2960 Series, Configuration Manual

Page: 1001 / 2288

Description Value Cause Code
Failure to authenticate number of the
calling-party. CLID-Authentication-Failure 4
A modem in not available to connect the
call. No-Modem-Available 9
No carrier detected.
Codes 10, 11, and 12 can be sent
if there is a disconnection during
initial modem connection.
Note
No-Carrier 10
Loss of carrier. Lost-Carrier 11
Failure to detect modem result codes. No-Detected-Result-Codes 12
User terminates a session.
Codes 20, 22, 23, 24, 25, 26, 27,
and 28 apply to EXEC sessions.
Note
User-Ends-Session 20
Timeout waiting for user input.
Codes 21, 100, 101, 102, and 120 apply to
all session types.
Idle-Timeout 21
Disconnect due to exiting Telnet session. Exit-Telnet-Session 22
Could not switch to SLIP/PPP; the remote
end has no IP address. No-Remote-IP-Addr 23
Disconnect due to exiting raw TCP. Exit-Raw-TCP 24
Bad passwords. Password-Fail 25
Raw TCP disabled. Raw-TCP-Disabled 26
Control-C detected. Control-C-Detected 27
EXEC process destroyed. EXEC-Process-Destroyed 28
User closes a virtual connection. Close-Virtual-Connection 29
Virtual connected has ended. End-Virtual-Connection 30
User exists Rlogin. Exit-Rlogin 31
Invalid Rlogin option selected. Invalid-Rlogin-Option 32
Insufficient resources. Insufficient-Resources 33
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
919
Information about RADIUS