Cisco Catalyst 2960 Series, Configuration Manual

Page: 2224 / 2288

SUMMARY STEPS
1.
enable
2. configure terminal
3.
vtp domain domain-name
4.
vtp mode server
5. end
6.
show vtp status
7. show vlan
8. configure terminal
9.
interface interface-id
10. switchport mode trunk
11.
end
12.
show interfaces interface-id switchport
13. Repeat the above steps on Switch A for a second port in the switch or switch stack.
14. Repeat the above steps on Switch B to configure the trunk ports that connect to the trunk ports configured
on Switch A.
15. show vlan
16.
configure terminal
17. interface interface-id
18. spanning-tree vlan vlan-range port-priority priority-value
19.
exit
20. interface interface-id
21.
spanning-tree vlan vlan-range port-priority priority-value
22.
end
23. show running-config
24.
copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password if
prompted. enable
Example:
Switch>
enable
Step 1
Enters global configuration mode on Switch A. configure terminal
Example:
Switch# configure terminal
Step 2
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2142
How to Configure VLAN Trunks