Cisco Catalyst 2960 Series, Configuration Manual

Page: 153 / 2288

Purpose Command or Action
• geo-location — Specifies geo-spatial location information.
Switch(config-civic)# number 3550
Switch(config-civic)# primary-road-name "Cisco
Way"
Switch(config-civic)# city "San Jose"
Switch(config-civic)# state CA
Switch(config-civic)# building 19
Switch(config-civic)# room C6
Switch(config-civic)#
county "Santa Clara"
Switch(config-civic)# country US
•
identifier id
— Specifies the ID for the civic, ELIN,
custom, or geo location.
•
host
—
Specifies the host civic, custom, or geo location.
• string — Specifies the site or location information in
alphanumeric format.
Returns to global configuration mode.
exit
Example:
Switch(config-civic)# exit
Step 3
Specifies the interface on which you are configuring the location
information, and enter interface configuration mode. interface interface-id
Example:
Switch (config)# interface gigabitethernet2/0/1
Step 4
Enters location information for an interface:
location
{
additional-location-information word
|
civic-location-id { id | host } | elin-location-id id |
Step 5
•
additional-location-information
— Specifies additional
information for a location or place.
custom-location-id { id | host } | geo-location-id { id |
host } }
Example:
Switch(config-if)# location elin-location-id 1
•
civic-location-id
—
Specifies global civic location
information for an interface.
• elin-location-id — Specifies emergency location
information for an interface.
•
custom-location-id
—
Specifies custom location
information for an interface.
•
geo-location-id
—
Specifies geo-spatial location
information for an interface.
•
host
— Specifies the host location identifier.
•
word
—
Specifies a word or phrase with additional location
information.
• id — Specifies the ID for the civic, ELIN, custom, or geo
location. The ID range is 1 to 4095.
Returns to privileged EXEC mode. end
Example:
Switch(config-if)# end
Step 6
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
71
How to Configure LLDP, LLDP-MED, and Wired Location Service