Cisco Catalyst 2960 Series, Configuration Manual

Page: 1789 / 2288

Example:
Device# show event manager history events
No. Time of Event Event Type Name
1 Fri Aug13 21:42:57 2004 snmp applet: SAAping1
2 Fri Aug13 22:20:29 2004 snmp applet: SAAping1
3 Wed Aug18 21:54:48 2004 snmp applet: SAAping1
4 Wed Aug18 22:06:38 2004 snmp applet: SAAping1
5 Wed Aug18 22:30:58 2004 snmp applet: SAAping1
6 Wed Aug18 22:34:58 2004 snmp applet: SAAping1
7 Wed Aug18 22:51:18 2004 snmp applet: SAAping1
8 Wed Aug18 22:51:18 2004 application applet: CustApp1
Step 6 show event manager history traps { server | policy }
Use this command to display the EEM SNMP traps that have been sent either from the EEM server or from an EEM
policy. In the following example, the EEM SNMP traps that were triggered from within an EEM policy are displayed.
Example:
Device# show event manager history traps policy
No. Time Trap Type Name
1 Wed Aug18 22:30:58 2004 policy EEM Policy Director
2 Wed Aug18 22:34:58 2004 policy EEM Policy Director
3 Wed Aug18 22:51:18 2004 policy EEM Policy Director
Displaying Embedded Event Manager Registered Policies
Perform this optional task to display registered EEM policies.
SUMMARY STEPS
1. enable
2. show event manager policy registered [ event-type event-name ] [ time-ordered | name-ordered ]
DETAILED STEPS
Step 1 enable
Enables privileged EXEC mode. Enter your password if prompted.
Example:
Device>
enable
Step 2
show event manager policy registered
[
event-type event-name
] [
time-ordered
|
name-ordered
]
Use this command with the
time-ordered
keyword to display information about currently registered policies sorted by
time, for example:
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1707
How to Write EEM Policies Using the Cisco IOS CLI