Cisco Catalyst 2960 Series, Configuration Manual

Page: 1297 / 2288

Technical Assistance
Link Description
http://www.cisco.com/support
The Cisco Support website provides extensive online
resources, including documentation and tools for
troubleshooting and resolving technical issues with
Cisco products and technologies.
To receive security and technical information about
your products, you can subscribe to various services,
such as the Product Alert Tool (accessed from Field
Notices), the Cisco Technical Services Newsletter,
and Really Simple Syndication (RSS) Feeds.
Access to most tools on the Cisco Support website
requires a Cisco.com user ID and password.
Feature Information for IPv4 Access Control Lists
Feature Information Release
IPv4 Access Control Lists perform packet filtering
to control which packets move through the network
and where. Such control provides security by helping
to limit network traffic, restrict the access of users
and devices to the network, and prevent traffic from
leaving a network. This feature was introduced. Cisco IOS 15.0(2)EX
The Named ACL Support for Noncontiguous Ports
on an Access Control Entry feature allows you to
specify noncontiguous ports in a single access control
entry, which greatly reduces the number of entries
required in an access control list when several entries
have the same source address, destination address,
and protocol, but differ only in the ports. Cisco IOS 15.2(2)E
The IP Access List Entry Sequence Numbering
feature helps users to apply sequence numbers to
permit or deny statements and also reorder, add, or
remove such statements from a named IP access list.
This feature makes revising IP access lists much
easier. Prior to this feature, users could add access
list entries to the end of an access list only; therefore
needing to add statements anywhere except the end
required reconfiguring the access list entirely.
The following commands were introduced or
modified:
deny (IP) , ip access-list resequence deny
(IP) , permit (IP) .
Cisco IOS 15.2(2)E
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1215
Feature Information for IPv4 Access Control Lists