Cisco Catalyst 2960 Series, Configuration Manual

Page: 862 / 2288

TACACS AV Pairs
The network access server implements authorization and accounting functions by transmitting
and receiving attribute-value (AV) pairs for each user session.
TACACS Authentication and Authorization AV Pairs
The following table lists and describes the supported authentication and authorization AV pairs
and specifies the Cisco IOS release in which they are implemented.
Table 86: Supported Authentication and Authorization AV Pairs
12.2 12.1 12.0 11.3 11.2 11.1 11.0 Description Attribute
yes yes yes yes yes yes yes ASCII
number
representing
a connection
access list.
Used only
when
service=shell. acl=x
yes yes yes yes yes yes yes A network
address.
Used with
service=slip,
service=ppp,
and
protocol=ip.
Contains the
IP address
that the
remote host
should use
when
connecting
via SLIP or
PPP/IP. For
example,
addr=10.2.3.4. addr=x
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
780
Information About