Cisco Catalyst 2960 Series, Configuration Manual

Page: 1631 / 2288

Purpose Command or Action
Example:
Switch> enable
Enters the global configuration mode. configure terminal
Example:
Switch# configure terminal
Step 2
Specifies the recipient of the trap message.
snmp-server host host-addr
{
traps | informs
}
{ version { 1 | 2c | 3 }} community-string
notification-type
Step 3
• host-addr — Specifies the name or address of the NMS.
Example:
Switch(config)#
snmp-server host
•
traps (the default)
—
Sends SNMP traps to the host.
• informs — Sends SNMP informs to the host.
•
version
— Specifies the SNMP version to support. Version
1, the default, is not available with informs.
172.20.10.10 traps private
mac-notification
•
community-string
—
Specifies the string to send with the
notification operation. You can set this string by using the
snmp-server host command, but we recommend that you
define this string by using the snmp-server community
command before using the snmp-server host command.
• notification-type — Uses the
mac-notification
keyword.
Enables MAC threshold notification traps to the NMS. snmp-server enable traps mac-notification
threshold Step 4
Example:
Switch(config)# snmp-server enable traps
mac-notification threshold
Enables the MAC address threshold notification feature. mac address-table notification threshold
Example:
Switch(config)#
mac address-table
Step 5
notification threshold
Enters the threshold value for the MAC address threshold usage
monitoring.
mac address-table notification threshold
[
limit
percentage ] | [
interval time
]
Step 6
Example:
Switch(config)#
mac address-table
• (Optional)
limit percentage
— Specifies the percentage of
the MAC address table use; valid values are from 1 to 100
percent. The default is 50 percent.
notification threshold interval 123
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1549
How to Administer the Switch