Cisco Catalyst 2960 Series, Configuration Manual

Page: 680 / 2288

SUMMARY STEPS
1.
configure terminal
2. class-map [ match-all | match-any ] class-map-name
3.
policy-map policy-map-name
4.
class
[ class-map-name |
class-default
]
5. trust [ cos | dscp | ip-precedence ]
6.
set { dscp new-dscp | ip precedence new-precedence }
7. police rate-bps burst-byte [ exceed-action { drop | policed-dscp-transmit }]
8. exit
9.
exit
10. interface interface-id
11.
service-policy input policy-map-name
12.
end
13. show policy-map [ policy-map-name [ class class-map-name ]]
14.
copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enters the global configuration mode. configure terminal
Example:
Switch#
configure terminal
Step 1
Creates a class map, and enters class-map configuration mode. class-map [ match-all | match-any ]
class-map-name
Step 2
By default, no class maps are defined.
Example:
Switch(config)# class-map
• (Optional) Use the match-all keyword to perform a logical-AND of all
matching statements under this class map. All match criteria in the class map
must be matched.
ipclass1
• (Optional) Use the match-any keyword to perform a logical-OR of all
matching statements under this class map. One or more match criteria must
be matched.
• For class-map-name , specify the name of the class map.
If neither the match-all or match-any keyword is specified, the default is
match-all .
Creates a policy map by entering the policy map name, and enters policy-map
configuration mode. policy-map policy-map-name
Example:
Switch(config-cmap)# policy-map
Step 3
By default, no policy maps are defined.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
598
How to Configure QoS