Cisco Catalyst 2960 Series, Configuration Manual

Page: 1491 / 2288

Purpose Command or Action
Returns to privileged EXEC mode. end
Example:
Switch(config-if)#
end
Step 11
Related Topics
Open1x Authentication, on page 1347
Disabling 802.1x Authentication on the Port
You can disable 802.1x authentication on the port by using the no dot1x pae interface configuration command.
Beginning in privileged EXEC mode, follow these steps to disable 802.1x authentication on the port. This
procedure is optional.
SUMMARY STEPS
1. configure terminal
2.
interface interface-id
3. switchport mode access
4. no dot1x pae authenticator
5.
end
DETAILED STEPS
Purpose Command or Action
Enters the global configuration mode. configure terminal
Example:
Switch#
configure terminal
Step 1
Specifies the port to be configured, and enter interface
configuration mode. interface interface-id
Example:
Switch(config)# interface gigabitethernet2/0/1
Step 2
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1409
How to Configure 802.1x Port-Based Authentication