manualshive.com logo in svg

Cardinal Health Alaris 8000 Series, Directions For Use Manual

The Cardinal Health Alaris 8000 Series is a state-of-the-art infusion pump system designed for accuracy and reliability. Ensure proper usage with the included Directions For Use Manual. Download the manual for free from manualshive.com and get the most out of your medical equipment. Keep your patients safe with this essential resource.

Share
Download
background image

GENERAL INFORMATION

WARNINGS AND CAUTIONS

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-73

General

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-73

Administration Sets

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-74

Epidural Administration

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-75

Guardrails

®

Suite MX

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-76

ADMINISTRATION SET / SYRINGE INFORMATION

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-77

SmartSite

®

Infusion Set (Pump Module)

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-78

Safety Clamp Fitment (Pump Module)

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-78

Compatible Syringes (Syringe Module)

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-79

FEATURES AND DISPLAYS

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-80

Features and Definitions

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-80

Operating Features, Controls, Indicators

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-87

Displays

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-90

DRUG CALCULATION DEFINITIONS AND FORMULAS

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-91

CONFIGURABLE SETTINGS

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-92

Shared Infusion

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-92

Pump Module

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-93

Syringe Module

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-94

SPECIFICATIONS

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-95

Pump Module

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-95

Syringe Module

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-97

SYMBOLS

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-101

Pump and Syringe Modules

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-101

Pump Module

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-101

TRUMPET AND START-UP CURVES

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-102

Introduction

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-102

Graphs

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-105

TROUBLESHOOTING AND MAINTENANCE

GENERAL

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-109

ALARMS, ERRORS, MESSAGES

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-109

Definitions

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-110

Audio Characteristics

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-110

Alarms

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-110

Errors

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-115

Messages

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-116

Possible End of Infusion Messages and Alerts

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-118

INSPECTION REQUIREMENTS

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-118

ii

Table of Contents

Alaris

®

System Directions for Use

Pump and Syringe Modules Section

Summary of Contents for Alaris 8000 Series



























































































































































































































































































































































































Reviews:

No comments

Related manuals for Alaris 8000 Series

ABB E-Hub 2.0 Getting Started preview
E-Hub 2.0
Brand: ABB Pages: 18
R-Tech X5 Quick Manual preview
X5
Brand: R-Tech Pages: 3
MAHLE MCX-2 Operation Manual preview
MCX-2
Brand: MAHLE Pages: 21
Bante Instruments ORPscan10 User Manual preview
ORPscan10
Brand: Bante Instruments Pages: 6
Velp Scientifica ECO 8 Operation Manual preview
ECO 8
Brand: Velp Scientifica Pages: 12
Yamaha D24 Upgrade Manual preview
D24
Brand: Yamaha Pages: 24
J&M Nitro Gro 5010 Assembly Manual preview
Nitro Gro 5010
Brand: J&M Pages: 33
M-Audio ProFire Lightbridge Quick Start Manual preview
ProFire Lightbridge
Brand: M-Audio Pages: 8
M-Audio REVOLUTION 5.1 User Manual preview
REVOLUTION 5.1
Brand: M-Audio Pages: 36
M-Audio X-Session Pro User Manual preview
X-Session Pro
Brand: M-Audio Pages: 12
M-Audio USB OMNISTUDIO Manual Del Usuario preview
USB OMNISTUDIO
Brand: M-Audio Pages: 64
M-Audio Pro Tools User Manual preview
Pro Tools
Brand: M-Audio Pages: 16
M-Audio ProjectMix I/O Quick Start Manual preview
ProjectMix I/O
Brand: M-Audio Pages: 4
M-Audio Delta 1010 Manual preview
Delta 1010
Brand: M-Audio Pages: 52
MAHA MBT Series Operating Instructions Manual preview
MBT Series
Brand: MAHA Pages: 21
MAGUIRE PRS-20 Installation Operation & Maintenance preview
PRS-20
Brand: MAGUIRE Pages: 47
Nederman RBU 1300 User Manual preview
RBU 1300
Brand: Nederman Pages: 255
Ultraflex A98 Installation And Maintenance Manual preview
A98
Brand: Ultraflex Pages: 52

Brands by name

Popular brands

Load more brands