Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 211 / 378

Alaris
®
System Directions for Use
Patient Controlled Analgesia Module Section
Programming
3-33
A
>Press CONFIRM
Clinical Advisor
y
:
Attach an SpO2 or EtCO2
module now.
The drug selected will
activate the PCA Pause
Protocol once a monitoring
device is operating.
CONFIRM
EXIT
Programming an Infusion with PCA Pause Protocol Enabled
1. Perform steps
1
-
8
in “Preparing Infusion”, “Programming
an Infusion”.
2. Confirm drug and concentration selections and press Yes
soft key.
3. If facility has chosen to enable optional PCA Pause
Protocol, review Clinical Advisory. To continue, press
CONFIRM
soft key.
To activate PCA Pause Protocol, attach and start an
Alaris
®
E
t
CO
2
Module and/or Alaris
®
S
p
O
2
Module per
facility protocol.
• Verify appropriate monitoring modules are attached to
PC Unit and press
CONFIRM
soft key.
€
4. Verify parameters are correct and press
NEXT
soft key to
confirm.
• Clinical Advisory appears.
5. Press
CONFIRM
soft key. 
A
>Press CONFIRM
PCA Pause Limits
should be reviewed.
Press PAUSE LIMITS to
review the current settings.
Press CONFIRM to continue
programming the PCA
infusion.
CONFIRM
PAUSE
LIMITS
6. Start applicable infusion, as described in following
procedures:
‚
Setting Up PCA Dose Only
Setting Up Continuous Infusion Only
Setting Up PCA Dose + Continuous Infusion
Setting Up Loading Dose Only