Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 185 / 378

Programming
Alaris
®
System Directions for Use
Patient Controlled Analgesia Module Section
References throughout this procedure to specific drugs and
drug doses are for illustration purposes only. Refer to specific
drug product labeling for information concerning appropriate
administration techniques and dosages.
Reference “General Information”, “Features and Displays” and
the PC Unit Section of this
DFU
for information on the
following:
• Displays
• Operating Features, Controls, Indicators
Preparing Infusion
At the start of an infusion program, the system prompts user
to select and confirm the syringe type and size.
€
Ensure the displayed syringe
manufacturer and size correctly
identifies the installed syringe.
Mismatches may cause an under-
infusion or over-infusion to the
patient that could result in serious
injury and/or death. For a list of
compatible syringes, reference
“General Information”, “Compatible
Syringes”. If the installed syringe is
displayed and selected, but is not
recognized, servicing is required
(reference “Service Information” in
“Appendix” Section of this
DFU
).
WARNING
Programming
3-7
Selecting Syringe Type and Size
CHANNEL
SELECT
RATE (mL/h)
1. Press
CHANNEL SELECT
key. Key must be in
PROGRAM
position.