Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 267 / 378

General Information
4-23 Alaris
®
System Directions for Use
SpO
2
Modules Section
Features and Displays (Continued)
Operating Features, Controls, Indicators
ALARM
MONIT
OR
STANDBY
%SpO
2
PULSE
(BPM)
CHANNEL
SELECT
CHANNEL
OFF
MONIT
OR
Module Release Latch:
When pressed, allows module
to be removed.
Pulse Bar Display
Patient Cable Connector
%S
p
O
2
Display
Pulse Rate Display
Channel (module)
Message Display
Channel (module) Select Key:
When pressed, selects
corresponding module for patient
monitoring and setup.
Channel (module) Identification
Monitor Key:
When pressed,
begins patient monitoring.
Channel (module) Off Key:
When pressed and held until a
beep is heard, stops operation of
that module, deselects that module,
and if only that module had been
operating, system powers down.
Repeat for other operating modules
to power off each module.
Infusing
(green)
Alarm
(red)
Standby
(yellow)
Status Indicators
IUI Connector, Left
(not visible)
IUI Connector, Right