Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 145 / 378

General Information
2-89
Alaris
®
System Directions for Use
Pump and Syringe Modules Section
Operating Features, Controls, Indicators (Continued)
Features and Displays (Continued)
Rate Display
Message Display
Channel (module) Identification
Module Release Latch:
When pressed,
allows module to be removed.
Pressure Transducer / Pressure Sensing Disc Housing
Channel (module) Select Key:
When pressed, selects corresponding
module for infusion parameter entry and
infusion setup.
Pause Key:
When pressed during an
infusion, temporarily stops infusion on
that module. After approximately
2 minutes, a visual and audio prompt
begins.
Channel (module) Off Key:
When
pressed and held until a beep is heard,
stops infusion on that module, deselects
that module, and if only that module had
been operating, system powers down.
Repeat for other operating modules to
power off each module.
Restart Key:
When pressed, resumes
operation of a previously paused or
alarmed infusion on that module.
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL
OFF
PAUSE
RESTART
RATE (mL/h)
Infusing
(green)
Alarm
(red)
Standby
(yellow)
Status Indicators
IUI Connector, Left
IUI Connector, Right
Gripper Control /
Drive Head Release
(
shown in closed position
)
Plunger Grippers
(
shown in closed position
)
Syringe Barrel Clamp /
Sizer
Barrel Flange Grippers
Syringe Barrel Sensor
ALARM INFUSE STANDBY
CHANNEL
SELECT
CHANNEL
OFF
PAUSE
RESTART
RATE (mL/h)