Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 98 / 378

5. Verify parameters are correct and press
NEXT
soft key to
confirm.
• If programmed total dose drug amount is outside Soft
Limit for that care area, a prompt appears before
programming can continue. If
Yes soft key is pressed,
programming continues; if No soft key is pressed,
infusion needs to be reprogrammed.
•
If programmed total dose drug amount is outside Hard
Limit for that care area, a prompt appears before
programming can continue. Infusion needs to be
reprogrammed.
•
If a dose outside of Soft Limits has been entered and
verified as correct, Message Display also shows either
"
LLL
" for a low dose or "
↑↑↑
" for a high dose.
6. To enter secondary infusion
VTBI
, press
VTBI
soft key and
use numeric data entry keys.
ƒ
2-42
Programming
Alaris
®
System Directions for Use
Pump and Syringe Modules Section
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM
INFUSE STANDBY
Infusion (Continued)
• If selected drug is not weight-based, Not Used
displays in
PATIENT WEIGHT
field.
• If hospital/facility practice guidelines identify selected
drug as weight-based, prompt for a patient weight in
kilograms or
BSA
appears (as in illustrated example,
which reflects use of Methotrexate).
‚
[Conc]: 342 mg/mL
_ _ _
mL/h
_ _ _ _
h min
RATE =
VTBI
DURATION
RATE
VOLUME
A
>Enter Secondary VTBI
DOSE =
SETUP
1200
mg/m
2
ALL
Guardrails Drug Setup
Methotrexate
SECONDARY
Secondary Infusion
- With Guardrails
®
Suite MX Protection
(
Pump Module
) (Continued)
A
DRUG
AMOUNT
DILUENT
VOLUME
6840
mg
20
mL
[Conc]: 1.7 mg/mL
>Enter BSA
DOSE =
_ _ _
mg/m 2
Guardrails Drug Setup
Methotrexate
BSA
_ _ _
m 2
DRUG
LIBRARY
PRIMARY