Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 282 / 378

To ensure the system remains in good operating condition,
both regular and preventive maintenance inspections are
required. Reference the Maintenance Software and Software
User Manual (v
8.1
or later) for detailed instructions.
REGULAR INSPECTIONS
PROCEDURE FREQUENCY
INSPECT FOR DAMAGE:
Case Each usage
IUI Connector Each usage
Keypad Each usage
CLEANING
As required
START-UP
Each usage
4-38
Troubleshooting and Maintenance
Alaris
®
System Directions for Use
SpO
2
Modules Section
Inspection Requirements
Failure to perform these
inspections may result in improper
instrument operation.
WARNING
Regular and preventive
maintenance inspections should
only be performed by qualified
service personnel.
CAUTION
Alarms and Messages (Continued)
Check Sensor - Weak Signal Low quality of signal being
measured. Check sensor. Confirm correct
sensor placement. Move sensor to
a better perfused site.
8220 Series
Check Sensor - Low Perfusion Patient’s low perfusion has
inhibited monitoring. Check sensor. Move sensor to a
better perfused site.
Check Sensor - Low Signal I.Q. Low signal quality being measured. Check sensor. Confirm correct
sensor placement. Move sensor to
a better perfused site.
Message Meaning Response
(8220)
Messages (Continued)
8210 Series (Continued)
(8210)
Check Sensor - Motion
Interference Patient’s motion has inhibited
monitoring. Check sensor. Move sensor to a
site with less motion.
Check Sensor - Weak Pulse Patient’s low perfusion has
inhibited monitoring. Check sensor. Move sensor to a
better perfused site.
Message Meaning Response