Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 99 / 378

Programming
2-43 Alaris
®
System Directions for Use
Pump and Syringe Modules Section
Pausing, Restarting, Restoring Infusion
Reference "Primary Infusion - With Guardrails
®
Suite MX
Protection", "Continuous Infusion" procedure.
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM
INFUSE STANDBY
[Conc]: 342 mg/mL
4
mL/h
6:00
hh:mm
RATE =
VTBI
DURATION
RATE
VOLUME
A
>Verify Secondary Clamp
Open, Then Press START
DOSE =
SETUP
1200
mg/m 2
START PAUSE
ALL
Guardrails Drug Setup
Methotrexate
SECONDARY
Infusion (Continued)
7. If an optional hospital-defined and editable starting value
for intermittent duration is not already entered, enter
duration or rate, as follows:
•
To enter duration, press
DURATION
soft key and use
numeric data entry keys (rate value is calculated and
displayed).
• To enter rate, press
RATE VOLUME
soft key and use
numeric data entry keys.
Changing Rate or VTBI During Infusion
Reference "Primary Infusion - With Guardrails
®
Suite MX
Protection", "Continuous Infusion" procedure.
Secondary Infusion
- With Guardrails
®
Suite MX Protection
(
Pump Module
) (Continued)
8. Verify parameters are correct and press
START
soft key.
• If programmed duration is outside Soft Limit for that
care area, a prompt appears before programming can
continue. If
Yes soft key is pressed, programming
continues; if No soft key is pressed, infusion needs to
be reprogrammed.
•
If programmed duration is outside Hard Limit for that
care area, a prompt appears before programming can
continue. Infusion needs to be reprogrammed.