Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 74 / 378

2-18
Programming
Alaris
®
System Directions for Use
Pump and Syringe Modules Section
BD 30 mL
Monoject 30 mL
>Select Syringe Size
A
A S
y
ringe Selection
CONFIRM
ALL
SYRINGES
CHANNEL
SELECT
CHANNEL
OFF
PAUSE
RESTART
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
Primary Infusion
- With Guardrails
®
Suite MX Protection (Continued)
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM
INFUSE STANDBY
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL
OFF
PAUSE
RESTART
RATE (mL/h)
4. Press
CHANNEL SELECT
key.
a. Press soft key next to installed syringe type and size.
If a default syringe list has been enabled and correct
syringe cannot be found, press
ALL SYRINGES
soft
key.
Ensure the displayed syringe
manufacturer and syringe size
correctly identify the installed
syringe. Mismatches may
cause an under-infusion or
over-infusion to the patient that
could result in serious injury and/or
death. For a list of compatible
syringes, reference "General
Information", "Compatible Syringes".
If the installed syringe is displayed
and selected, but is not recognized,
servicing is required (reference
"Maintenance", "Service Information"
in "Appendix" Section of this
DFU
).
WARNING
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL OFF
PAUSE
RESTART
RATE (mL/h)
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL OFF
PAUSE
RESTART
RATE (mL/h)
5. If a Syringe Module is being programmed, select
syringe type and size, as follows; otherwise, proceed
to step 6.
€