Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 364 / 378

A-2
Maintenance
Alaris
®
System Directions for Use
Appendix Section
If the instrument shows evidence of damage in transit, notify
the carrier’s agent immediately. Do not return damaged
equipment to the factory before the carrier’s agent has
authorized repairs.
If the instrument fails to respond as described in this
document and the cause cannot be determined, do not use
the instrument. Contact qualified Cardinal Health service
personnel.
If it is necessary to return the instrument for service, obtain a
return authorization number prior to shipment. Carefully
package the instrument (preferably in the original packaging),
reference the return authorization information, and return it to
the appropriate service or distribution center. Cardinal Health
does not assume any responsibility for loss of, or damage to,
returned instruments while in transit.
Service Information
• The instrument case should only
be opened by qualified personnel
using
proper grounding
techniques . Prior to performing
maintenance, disconnect
attached module from the Alaris
®
System and the PC Unit from AC
power.
• During servicing, an instrument’s
configuration settings might be
reset to the factory defaults.
Qualified hospital/facility
personnel are responsible for
checking in the instrument and
ensuring the current hospital-
approved data set is loaded.
WARNINGS
Technical support, service information, applications, and
manuals may be obtained by contacting a Cardinal Health
representative.
When submitting any request for service, include:
• model number
• a description of difficulty experienced
• instrument settings
• administration set/lot number
• solution(s) used
• message displayed at time of difficulty
Technical Support