Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 133 / 378

The Syringe Module uses standard, single-use,
disposable syringes (with luer-lock connectors) and
administration sets, designed for use on syringe pumps.
• For a list of compatible syringes, reference
"Compatible Syringes".
The Pump Module uses a wide variety of Alaris
®
Pump
Module/Gemini Infusion System administration sets. The
sets are designed for use with the Pump Module as well
as for gravity-flow, stand-alone use.
• Primary set must be primed before use. It can be
loaded into Pump Module to deliver a large volume
infusion or it can be set up to deliver a gravity
infusion.
• Safety clamp fitment is a unique clamping device on
the pumping segment that is part of all Alaris
®
Pump
Module/Gemini Infusion System sets (reference
"Safety Clamp Fitment").
General Information
2-77
Alaris
®
System Directions for Use
Pump and Syringe Modules Section
Infusion Modules:
• For specific administration set instructions,
reference directions for use provided with set.
• For a list of compatible administration sets,
reference Set Compatibility Card (provided
separately).
• Use aseptic techniques when handling sets and
syringes.
• Administration sets are supplied with a sterile
and nonpyrogenic fluid path for one-time use.
Do not resterilize.
• For administration set replacement interval, refer
to facility protocol and/or government standards
(such as,
CDC
guidelines in United States).
• Discard administration set per facility protocol.
• For
IV
push medication (put instrument on hold),
clamp tubing above port.
• Flush port(s) per facility protocol.
Administration Set / Syringe Information
ALARM
INFUSE
STANDBY
CHANNEL
SELECT
CHANNEL OFF
PAUSE
RESTART
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM
INFUSE STANDBY
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL
OFF
PAUSE
RESTART
RATE (mL/h)