Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 255 / 378

2. To change Limit Mode Setup , press applicable soft key.
OR
To leave Limit Mode Setup unchanged and return to
SPO2
Main display, press
EXIT
soft key.
A
A
Adult
Neonatal
Limit Mode Setup
EXIT
>Select an Option or
EXIT
Programming
4-11 Alaris
®
System Directions for Use
SpO
2
Modules Section
Channel Options (Continued)
Changing Limit Mode (Continued)
Changing Pulse Beep Volume
1. Press Pulse Beep Volume soft key.
A
Pulse Beep Volume: Off
SatSeconds Limits: 10
Limit Mode: Adult
Channel Options
>Select an Option or
EXIT
EXIT
2. To test or change:
a. To test volume level (when not attached to patient),
press Test soft key.
€
b. To increase volume, press Louder soft key until
desired volume level is attained (
1
,
2
or
3
).
c. To decrease volume, press Softer soft key until
desired volume level is attained.
d. To turn off pulse beep, press Off soft key.
3. To return to
SPO2
Main display, press
CONFIRM
soft key.
A
Pulse Beep Volume
>Press CONFIRM
Louder Softer
A
Test
Off
1
A
Pulse Beep Volume
>Press CONFIRM
Louder Softer
A
Test
Off
1
CONFIRM
NOTE:
€
The pulse beep must be on to test the volume level. To turn
pulse beep on, press the
Louder soft key and adjust as
needed (steps 2b and 2c).