Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 308 / 378

The
E
t
CO
2
Module has been designed and manufactured to
exacting standards and should perform well within given
environmental and performance standards. There may be
certain conditions under which an inaccurate measurement or
the loss of respiratory rate signal may occur. Examples of
these conditions are as follows:
An inaccurate
E
t
CO
2
measurement may be caused by:
• Incorrect disposable application or use.
• Microstream
®
Disposable disconnected or not securely
connected to
E
t
CO
2
Module.
• Airway connection clogged, twisted, or leaking.
• Placement too close to electrosurgery equipment.
• Mechanically ventilated patient breathes spontaneously.
5-22
General Information
Alaris
®
System Directions for Use
EtCO
2
Module Section
Measurement Accuracy
• If uncertain about measurement
accuracy , assess patient’s
condition and vital signs by
alternate means, then ensure
E
t
CO
2
Module is functioning
correctly.
• Leaks or internal venting of
sampled gas may affect
accuracy.
WARNINGS
Specifications (Continued)
Specifications and Symbols (Continued)
Warm-Up Time:
30
seconds typical
Weight:
2.5
lbs (
0.91
kg)
Reference the PC Unit Section of this
DFU
for system symbols.
Symbols
Type BF defibrillation-proof equipment.
Gas inlet.
Gas outlet.
Silenced alarm.
-- Continued on Next Page --