Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 305 / 378

The displays illustrated throughout this document are for
illustration purposes only. The display content will vary,
depending on configuration settings, type of disposable in use,
hospital-defined data set uploaded using the Guardrails
®
Suite MX, programmed parameters, and many other variables.
General Information
5-19
Alaris
®
System Directions for Use
EtCO
2
Module Section
Reference the PC Unit Section of this
DFU
.
Features and Displays (Continued)
Displays
Main Display
Configurable Settings
Reference the PC Unit Section of this
DFU
for system
configurable settings.
If the configuration settings need to be changed from the
"Factory Default" settings, reference the applicable Technical
Service Manual or contact Cardinal Health Technical Support,
for technical, troubleshooting, and preventive maintenance
information.
With the Profiles feature enabled, the settings are configured
independently for each profile. A hospital-defined, best-practice
data set must be uploaded to enable the Profiles feature. Date
and Time is a system setting and is the same in all profiles.
5
-
99
mmHg
0
-
98
mmHg
2
-
99
mmHg
Adult or Neonatal
10
-
60
sec
1
-
150
bpm
0
-
149
bpm
Feature
E
t
CO
2
Alarm Limit, High
E
t
CO
2
Alarm Limit, Low
F
i
CO
2
Alarm Limit, High
Limit Mode
No Breath Alarm
Respiratory Rate Alarm Limit, High
Respiratory Rate Alarm Limit, Low
Default Setting Options
Adult:
60
mmHg
Neonatal:
60
mmHg
Adult:
10
mmHg
Neonatal:
10
mmHg
Adult:
8
mmHg
Neonatal:
8
mmHg
Adult
Adult:
30
sec
Neonatal:
20
sec
Adult Mode:
35
bpm
Neonatal Mode:
150
bpm
Adult Mode:
6
bpm
Neonatal Mode:
12
bpm