Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 82 / 378

2-26
Programming
Alaris
®
System Directions for Use
Pump and Syringe Modules Section
A bolus dose can be programmed at the beginning of, or
during, an infusion. The drug being programmed must be a
bolusable drug selected from the Guardrails
®
Drug Library or a
non-library drug, as described in the following procedures.
€  ‚ ƒ
1. Set up infusion as described in "Continuous Infusion"
procedure, but do not start infusion.
2. Press
BOLUS
soft key.
• If programmed continuous dose infusion is outside Soft
Limit for that care area, a prompt appears before
programming can continue. If
Yes soft key is pressed,
programming continues; if No soft key is pressed,
infusion needs to be reprogrammed.
• If programmed continuous dose infusion is outside
Hard Limit for that care area, a prompt appears before
programming can continue. Infusion needs to be
reprogrammed.
Bolus Dose
A A
A
RATE
VTBI
CONTINUOUS INFUSION
DOSE
.8
mg/kg/h
[Conc]: 1 mg/mL
SETUP BOLUS
100
mL
START PAUSE
>Press START
56
mL/h
Guardrails Drug Setup
Alteplase
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM
INFUSE STANDBY
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL
OFF
PAUSE
RESTART
RATE (mL/h)
1. Press
CHANNEL SELECT
key.
2. Press either
RATE
or
VTBI
soft key.
3. To enter desired parameter, use up/down arrows for rate
titration, or numeric data entry keys.
4. Verify correct infusion parameter entry and press
START
soft key.
Changing Rate or VTBI During Infusion
Continuous Infusion (Continued)
Primary Infusion
- With Guardrails
®
Suite MX Protection (Continued)