Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 199 / 378

Alaris
®
System Directions for Use
Patient Controlled Analgesia Module Section
Programming
3-21
Infusion Modes (Continued)
Setting Bolus Dose (Continued)
NOTE:
€
The
BOLUS DOSE
soft key is only available once an infusion
has begun in
PCA
dose only, continuous infusion, or
PCA
+
continuous infusion modes.
BOLUS
DOSE
[Conc]: 1 mg/mL
Guardrails Drug Setup
IMS Pre-fill 30mL
A
1
mg
Bolus
Dose:
Max Limit:
2
mg/h
Cont. Dose:
30
mg/4 h
>Press START
START PAUSE
PRO-
GRAM
3. Set key to
PROGRAM
position or enter
4
-digit
authorization code and press
CONFIRM
soft key.
4. To enter dose value, use numeric data entry keys.
5. Press
CONFIRM
soft key.
• If programmed bolus dose is outside soft limit for that
care area, a prompt appears before programming can
continue. If
Yes soft key is pressed, programming
continues; if No soft key is pressed, infusion needs to
be reprogrammed.
• If programmed bolus dose is outside hard limit for that
care area, a prompt appears before programming can
continue. Infusion needs to be reprogrammed.
6. If Authorization Code is disabled, door must be locked
prior to starting bolus dose.
7. Verify dose value is correct and then press
START
soft
key:
•
Delivering Bolus
scrolls in Channel Message Display
• Bolus and drug name alternate with VTBI in Main
Display
• When bolus dose is complete,
BOLUS COMPLETE
scrolls in Channel Message Display.
• Programmed infusion resumes.