Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 135 / 378

General Information
2-79
Alaris
®
System Directions for Use
Pump and Syringe Modules Section
Safety Clamp Fitment in Closed Position
When an Alaris
®
Pump Module/Gemini Infusion System
administration set is removed from the Pump Module, the
instrument automatically engages the safety clamp fitment in
the closed position (white slide clamp projects out from under
blue fitment). In this closed position, flow is occluded.
Blue Fitment
Administration Set / Syringe Information (Continued)
Safety Clamp Fitment (
Pump Module
) (Continued)
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM INFUSE STANDBY
Compatible Syringes (
Syringe Module
)
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL
OFF
PAUSE
RESTART
RATE (mL/h)
The Syringe Module is calibrated and labeled for use with the
following single-use disposable luer-lock syringes. Use only
the syringe size and type specified on the Main Display. The
full list of permitted syringe models is dependent on the
Syringe Module’s software version.
1cc 3cc

5cc
‚
6cc 10cc
‚
12cc 20cc 30cc 35cc 50cc
€
60cc
€
Manufacturer
AstraZeneca
B-D Plastipak
IVAC
Monoject
Terumo
When using a
10
cc or smaller
syringe , Cardinal Health strongly
recommends using an extension set
with a pressure disc, for improved
pressure monitoring and shorter
times to occlusion alarm.
CAUTION
White Slide Clamp
(shown in closed position)
NOTES:
€
Prefilled Diprivan.

The Monoject SoftPack Luer-Lock Syringe (blister pack) is the
only currently supported Monoject
3
cc.
‚
The Terumo
5
cc can also be used as a
6
cc and the
10
cc as a
12
cc.