Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 148 / 378

2-92
General Information
Alaris
®
System Directions for Use
Pump and Syringe Modules Section
Drug Calculation Definitions and Formulas (Continued)
• Total bolus dose:
Bolus dose not weight-based = bolus dose entered.
Bolus dose weight-based = bolus dose x patient weight.
• Total dose:
Drug amount.
Drug amount / patient body surface area (
BSA
).
Drug amount / patient weight.
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM
INFUSE STANDBY
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL
OFF
PAUSE
RESTART
RATE (mL/h)
Configurable Settings
Reference the PC Unit Section of this
DFU
for system
configurable settings.
If the configuration settings need to be changed from the
"Factory Default" settings, reference the applicable Technical
Service Manual or contact Cardinal Health Technical Support,
for technical, troubleshooting, and preventive maintenance
information.
With the Profiles feature enabled, the settings are configured
independently for each profile. A hospital-defined, best-
practice data set must be uploaded to enable the Profiles
feature. Date and Time is a system setting and is the same in
all profiles.
Enabled - Disabled
None, Before, After,
Before and After
Enabled - Disabled
Enabled - Disabled
Enabled - Disabled
None, Before, After,
Before and After
Enabled - Disabled
Enabled - Disabled
Feature
Delay Options
• Callback
Drug Calculation
• Bolus Dose
Multidose
• Callback
Pressure Dynamic
(
Dynamic Pressure Display
)
Volume/Duration
Default Setting Options
Disabled
None
Disabled
Disabled
Disabled
None
Disabled
Disabled
Shared Infusion
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM
INFUSE STANDBY
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL OFF
PAUSE
RESTART
RATE (mL/h)