manualshive.com logo in svg

Siemens ADVIA 2120, Руководство оператора, Страница: 80 / 477

Поделиться
Скачать
Siemens ADVIA 2120 Скачать руководство пользователя страница 80

Troubleshooting the Analyzer 

5-13 

 

♦

 

Drill bit 

♦

 

Needle cleaning kit, PN 113-B911-01 

- Coupling 

- Disposable syringe 

- Luer adapter 

♦

 

Pin vise 

•

 

Household bleach  

•

 

Lens tissue 

•

 

One 6 inch (15.2 cm) length of 0.020 inch (0.5 mm) ID C-Flex Tubing,  
PN 562-3052P02 

•

 

Spectrophotometric-grade methanol 

•

 

Two 50 mL beakers 

Syringe preparation 

Time:  Replacement - 10 minutes 

Checkout - 30 minutes 

Analyzer mode: Standby 

  

BIOHAZARD

 

All products or objects that come in contact with human or animal body fluids 
should be handled, before and after cleaning, as if capable of transmitting 
infectious diseases. Wear facial protection, gloves, and protective clothing. 

The operator should follow the recommendations to prevent the transmission of 
infectious agents in health-care settings as recommended for potentially 
infectious specimens in 

Protection of Laboratory Workers from Infectious 

Disease Transmitted by Blood, Body Fluids, and Tissue

, 2nd edition; Approved 

Guideline (1997) Document M29-A, National Committee for Clinical Laboratory 
Standards (NCCLS). This document contains complete information on user 
protection and it can be used as reference material for instructions on laboratory 
safety. 

IMPORTANT 

An inspection scope must be available for this procedure. Do not remove the 
flowcells unless you are trained in how to align and focus them. 

To remove and clean the flowcells 

1.

 

Remove the flowcell. There is a different procedure for each flowcell.  

2.

 

Take the flowcell apart. 

3.

 

Clean the CFM. 

4.

 

Flush the flowcell and the CFM. 

5.

 

Clean the glass windows of the flowcell. 

6.

 

Replace the flowcell. 

Содержание ADVIA 2120






























































































































































































































































































































































































































































































Отзывы:

Нет отзывов