manualshive.com logo in svg

Siemens ADVIA 2120, Руководство оператора, Страница: 55 / 477

Поделиться
Скачать
Siemens ADVIA 2120 Скачать руководство пользователя страница 55

Maintaining the Analyzer 

4-9 

 

3.

 

To remove the front shear 
face (

4

), gently rotate the 

front face until it is loosened, 
then pull forward and remove.
 
The rear shear face is 
stationary. 

 

  

CAUTION

 

To avoid damaging the seal that secures the shear valve to the acrylic layer of the 
UFC, do not use excessive force to remove the front shear face. 

DO NOT use sharp objects, such as a screwdriver, to separate the shear faces. If 
you have difficulty removing the rotor or the front shear face, hold paper towels 
under the shear valve and squirt the valve with a stream of warm water. If the 
rotor is off, squirt some water into the two holes in the front of the shear face. 
Allow it to soak for a few minutes, then remove the rotor and/or shear face.  

If you still have difficulty separating the shear faces, use the shear face removal 
tool (PN 067-1083-01) found in the spare parts kit. Gently wedge the sharp edge 
of the tool between the two faces, then remove the front shear face. 

Cleaning the Shear Valve: Step 2 
Cleaning the Shear-Valve Faces 

1.

 

Place the front shear face in a beaker with household bleach. If the laboratory 
is equipped with an ultrasonic bath, follow the instructions provided by the 
manufacturer. Otherwise, let the shear face soak in the beaker for 10 minutes, 
then thoroughly rinse with water. 

2.

 

To rinse the rear shear face, use a wash bottle filled with water. Use paper 
towels to catch dripping water. 

  

CAUTION

 

Do not wipe the shear faces with paper towels. This may leave fibers on the shear 
faces. 

Cleaning the Shear Valve: Step 3 
Putting the Shear Valve back Together 

  

CAUTION

 

You may assemble the shear valve while the faces are still wet. Never use paper 
towels, gauze, or cotton swabs on the shear faces. These may leave fibers on the 
surface that can clog the precision grooves. 

Содержание ADVIA 2120






























































































































































































































































































































































































































































































Отзывы:

Нет отзывов