Siemens ADVIA 2120, Руководство оператора, Страница: 421 / 477

ADVIA Autoslide Slide Maker Stainer 10-15
Click this button to reset the Autoslide module. This function is intelligent and will reset
only those autoslide mechanisms that require resetting. This may be necessary when
troubleshooting Autoslide module errors.
Depending on the state of the system, this may take up to 16 minutes.
Stopping the Autoslide Module (Fast Stop)
The
Fast Stop
button displays on some autoslide-related software tabs and windows,
most notably the Autoslide Control tab on the Operations menu.
Click this button to immediately stop the Autoslide module.
Any slides that are in the stainer will be lost when a Fast Stop occurs.
When a Fast Stop occurs, you must perform a Stainer Evacuation before returning to
normal system operation.
Running the Daily Shutdown Manually
Your system can be set to run the shutdown procedure at a preset time. However, if the
system is not set to do so, or if you are shutting down at a different time, perform the
following steps.
1. At the Operations menu, select
Autoslide Control
.
2. In the Autoslide Control tab, select
Shutdown
and then select
Start
.
IMPORTANT
Once the Daily Shutdown has occurred, you must perform a Daily Startup before
resuming Autoslide operation.
Disconnecting an Autoslide 90° Configuration
The following procedure explains how disconnect the ADVIA Autoslide system when it
is in a 90° configuration for lab automation or a stand alone system.