Siemens ADVIA 2120 Скачать руководство пользователя страница 102 | Manualshive

Страница: 102 / 477

Siemens ADVIA 2120 Скачать руководство пользователя страница 102

Troubleshooting the Analyzer

5-35

ELECTRICAL WARNING

To avoid exposure to shock hazards and/or damage to the instrument while
performing this procedure, power off the analyzer before proceeding.

BIOHAZARD

All products or objects that come in contact with human or animal body fluids
should be handled, before and after cleaning, as if capable of transmitting
infectious diseases. Wear facial protection, gloves, and protective clothing.

The operator should follow the recommendations to prevent the transmission of
infectious agents in health-care settings as recommended for potentially
infectious specimens in

Protection of Laboratory Workers from Infectious

Disease Transmitted by Blood, Body Fluids, and Tissue

, 2nd edition; Approved

Guideline (1997) Document M29-A, National Committee for Clinical Laboratory
Standards (NCCLS).

This document contains complete information on user protection and it can be
used as reference material for instructions on laboratory safety.

1.

Remove the tubing from the ports on the valve fitting, then carefully unscrew
the fittings.

2.

Remove the two mounting screws. Pull the valve forward until the connector
is exposed, then disconnect the cable.

3.

Connect the cable of the new valve assembly to the exposed connector on the
analyzer.

4.

Tuck the cable back into the opening. Mount the new valve, using the two
screws saved in step

2

.

5.

Replace the fittings. Make sure that they are threaded correctly. Fingers
tighten.

CAUTION

Do not overtighten, or you may cause damage to valve or fittings.

6.

Connect tubing.

«
...
100
101
102
103
104
...
»

Содержание ADVIA 2120






























































































































































































































































































































































































































































































Отзывы:

Нет отзывов